Epoxy Resin
28 products
Bisphenol A Liquid Epoxy Resin (EEW 176-186)
CAS 25068-38-6
Higher epoxy content (lower EEW) than standard BPA-128
Bisphenol A Liquid Epoxy Resin (EEW 184-194)
CAS 25068-38-6
Industry standard BPA epoxy — widest curing agent compatibility
Bisphenol A Solid Epoxy Resin (EEW 1750-2100)
CAS 25068-38-6
Highest flexibility in BPA solid epoxy range
Bisphenol A Solid Epoxy Resin (EEW 450-500)
CAS 25068-38-6
Medium molecular weight solid — ideal for powder coatings
Bisphenol F Liquid Epoxy Resin (EEW 155-170)
CAS 9003-36-5
3-5× lower viscosity than BPA epoxy at equal temperature
Bisphenol F Low Viscosity Epoxy (EEW 158-168)
CAS 9003-36-5
Lowest viscosity in bisphenol-based liquid epoxy range
Brominated Epoxy Resin (Tetrabromobisphenol A Diglycidyl Ether)
CAS 26265-08-7
~48-50% bromine — highest reactive FR efficiency in epoxy systems
CTBN-Toughened Epoxy System (Rubber Phase-Toughened)
CAS 25068-38-6
2-5× fracture toughness (GIc) improvement over unmodified epoxy
Construction and Civil Engineering Epoxy System
CAS 25068-38-6
High bond strength to concrete (>3 MPa, exceeds cohesive failure)
Cycloaliphatic Epoxy Resin (EEW 125-145)
CAS 2386-87-0
UV-cationic curable without oxygen inhibition
Epoxy Adhesive Paste (High-Strength Structural, Thixotropic)
CAS 25068-38-6
Non-sag thixotropic paste for vertical and overhead application
Epoxy Electrical Encapsulation System (Transformer and Power Electronics Grade)
CAS 25068-38-6
High dielectric strength (>18 kV/mm) for HV electrical insulation
Epoxy Filament Winding System (Wet Winding Grade)
CAS 25068-38-6
Optimized viscosity (500-2,000 mPa·s) for winding bath impregnation
Epoxy Infusion System (Low Viscosity, <300 mPa·s)
CAS 25068-38-6
Mixed viscosity <300 mPa·s for complete fiber wet-out in large parts
Epoxy Novolac Resin F-44 (High Temperature)
CAS 28064-14-4
Highest Tg (180-220°C) in the epoxy novolac family
Epoxy Novolac Resin F-51 (High Functionality)
CAS 28064-14-4
High functionality (3.5-4.0 epoxides/molecule) for dense cross-linking
Epoxy Prepreg System (Autoclave/OOA Grade)
CAS 25068-38-6
Semi-solid at room temperature — excellent tack and drape for complex lay-up
Epoxy Pultrusion System (High-Speed Continuous Profile Grade)
CAS 25068-38-6
Higher Tg (120-160°C) vs. polyester pultrusion systems (80-100°C)
Epoxy RTM System (Fast Demold, Automotive Grade)
CAS 25068-38-6
Injection viscosity <100 mPa·s at 80°C — complete mold fill in <30 seconds
Epoxy Tooling System (Low CTE, High-Temperature Composite Mold)
CAS 25068-38-6
Low CTE (25-35 µm/m/°C) for dimensional stability during autoclave cycles
Fast-Cure Epoxy System (5-Minute Pot Life, Rapid Repair Grade)
CAS 25068-38-6
5-10 minute pot life for rapid assembly and repair
Flexibilized Epoxy System (High Elongation, Impact-Resistant)
CAS 25068-38-6
High elongation at break (15-50%) for impact and peel resistance
High-Temperature Aerospace Epoxy System (Tg >200°C, DDS Cure)
CAS 25068-38-6
Tg 200-230°C — highest performance epoxy for aerospace structural applications
Marine Epoxy System (Osmosis-Resistant, Infusion/Laminating)
CAS 25068-38-6
Low water absorption (<2%) — osmosis-resistant for long-term marine immersion
Mono-Epoxy Reactive Diluent (2-Ethylhexyl Glycidyl Ether)
CAS 2461-15-6
Ultra-low viscosity (5-10 mPa·s) for maximum viscosity reduction
Neopentyl Glycol Diglycidyl Ether (Aliphatic Difunctional Epoxy)
CAS 17557-23-2
Difunctional — less Tg depression per unit of viscosity reduction vs. mono-functional diluents
Waterborne Epoxy Resin Dispersion (Eco-Friendly Coating Grade)
CAS 25068-38-6
Low VOC (<50 g/L) — compliant with EU, CARB, and China GB VOC regulations
Wind Turbine Blade Epoxy System (Infusion Grade)
CAS 25068-38-6
Low viscosity (<350 mPa·s) for 60-100m blade complete infusion