Applications

Closed mold process using vacuum pressure to infuse resin into dry fiber reinforcement.

Manual open-mold process, the most widely used method for GRP boat hulls, tanks, and panels.

Resin injected under pressure into a closed mold containing dry fiber preform.

Continuous process for producing constant cross-section FRP profiles, rods, and tubes.

Compression molding of sheet or bulk molding compounds for high-volume automotive and electrical parts.

Automated winding of resin-impregnated fibers onto a rotating mandrel for pipes, pressure vessels, and tanks.

Pre-impregnated fiber systems cured under heat and pressure for aerospace and high-performance structures.

Adhesive joining of composite and multi-material assemblies, replacing mechanical fasteners.

Automated chopped fiber and resin spray onto an open mold for boat hulls, tanks, and large panels.

Fast-cycle press molding where resin and fiber are loaded into an open mold and compressed under heat and pressure.

Resin and fiber are applied inside a rotating mold, producing seamless pipes, cylinders, and tubular structures.

Continuous production of flat FRP panels for building cladding, skylights, and agricultural sheeting.