22 products
1-Part Heat-Cure Epoxy Film Adhesive
One-component — no mixing, no mess, precise bond line control
1-Part Moisture-Cure PU Adhesive
Single component — no mixing required
2-Part Epoxy Structural Adhesive (5 min cure)
5-minute work time and fixture for rapid production cycles
2-Part Epoxy Structural Adhesive (60 min work time)
60-minute open time for large and complex assemblies
2-Part MMA Adhesive (2 min work time)
2-minute work time for ultra-fast production cycles
2-Part MMA Adhesive (Flexible Grade)
Flexible cured adhesive (Shore A 70–85) accommodates thermal movement and vibration
2-Part MMA Structural Adhesive (Standard)
Bonds most substrates with minimal surface preparation — no priming required
2-Part Polyurethane Composite Adhesive
High elongation (50–150%) and T-peel (≥6 kN/m) for flexible bonding
BMI Film Adhesive (Aerospace Grade)
Tg >230°C for high-temperature aerospace service
Epoxy Film Adhesive (120°C Cure)
120°C cure compatible with standard prepreg cure cycles
Epoxy Paste Adhesive for Sandwich Core Bonding
Hollow microsphere filling reduces adhesive weight (0.8–1.0 g/cm³)
Flexible Polyurethane Adhesive for FRP
Ultra-high elongation (>200%) for maximum flexibility
High Temperature Epoxy Adhesive (>200°C)
Tg >200°C for structural bonding at elevated temperature service
Low Viscosity Epoxy Adhesive (Crack Injection)
Low mixed viscosity (300–700 mPa·s) penetrates 0.1 mm cracks
MMA Adhesive Gel Paste (Vertical Surfaces)
Non-sag gel paste for vertical and overhead application
MMA Adhesive for Paintable Composite Parts
Withstands automotive paint bake cycles up to 180°C without bubbling
Marine Seam Bonding Adhesive
Tolerates light moisture on FRP surfaces — ideal for boatyard conditions
PU Foam Adhesive (Core-to-Skin Bonding)
Expanding foam fills surface irregularities between core and skin
PU Marine Adhesive Sealant
Combined adhesive + waterproof sealant in single product
Syntactic Foam Adhesive (Epoxy-Based)
Lightweight (0.5–0.7 g/cm³) due to hollow glass microsphere filling
Toughened Epoxy Adhesive (Impact Resistant)
CTBN/core-shell rubber toughening for quasi-ductile fracture
Wind Blade Web Bonding Paste
60–90 min open time for large-volume blade bonding operations