91 products
Epoxy Adhesive Paste (High-Strength Structural, Thixotropic)
CAS 25068-38-6
Non-sag thixotropic paste for vertical and overhead application
Epoxy Electrical Encapsulation System (Transformer and Power Electronics Grade)
CAS 25068-38-6
High dielectric strength (>18 kV/mm) for HV electrical insulation
Epoxy Filament Winding System (Wet Winding Grade)
CAS 25068-38-6
Optimized viscosity (500-2,000 mPa·s) for winding bath impregnation
Epoxy Infusion System (Low Viscosity, <300 mPa·s)
CAS 25068-38-6
Mixed viscosity <300 mPa·s for complete fiber wet-out in large parts
Epoxy Novolac Resin F-44 (High Temperature)
CAS 28064-14-4
Highest Tg (180-220°C) in the epoxy novolac family
Epoxy Novolac Resin F-51 (High Functionality)
CAS 28064-14-4
High functionality (3.5-4.0 epoxides/molecule) for dense cross-linking
Epoxy Novolac Vinyl Ester Resin (High Temp)
CAS 3066-71-5
HDT 140-175°C for high-temperature chemical service
Epoxy Prepreg System (Autoclave/OOA Grade)
CAS 25068-38-6
Semi-solid at room temperature — excellent tack and drape for complex lay-up
Epoxy Pultrusion System (High-Speed Continuous Profile Grade)
CAS 25068-38-6
Higher Tg (120-160°C) vs. polyester pultrusion systems (80-100°C)
Epoxy RTM System (Fast Demold, Automotive Grade)
CAS 25068-38-6
Injection viscosity <100 mPa·s at 80°C — complete mold fill in <30 seconds
Epoxy Tooling System (Low CTE, High-Temperature Composite Mold)
CAS 25068-38-6
Low CTE (25-35 µm/m/°C) for dimensional stability during autoclave cycles
Fast-Cure Epoxy System (5-Minute Pot Life, Rapid Repair Grade)
CAS 25068-38-6
5-10 minute pot life for rapid assembly and repair
Filament Winding Grade UPR
CAS 26455-61-8
Low viscosity (150-300 mPa·s) for efficient fiber wet-out in bath
Filament Winding Vinyl Ester Resin
CAS 3066-71-5
Extended bath stability (4-8h) for continuous winding runs
Fire Retardant UPR for Marine
CAS 26455-61-8
IMO FTP Code Part 5 & 6 compliant fire performance
Flame Retardant Vinyl Ester Resin
CAS 3066-71-5
Chemical resistance of vinyl ester + flame retardancy in one resin
Flexibilized Epoxy System (High Elongation, Impact-Resistant)
CAS 25068-38-6
High elongation at break (15-50%) for impact and peel resistance
Flexible/Rubber-Toughened UPR
CAS 26455-61-8
3-5× higher elongation at break versus standard UPR
Food-Contact Compliant UPR
CAS 26455-61-8
Compliant with EU 10/2011 and FDA food contact regulations
General Purpose Orthophthalic UPR
CAS 26455-61-8
Cost-effective general-purpose formulation
Halogenated Flame Retardant UPR (HET Acid)
CAS 26455-61-8
Reactive halogen flame retardancy — permanent, non-leachable
High Temperature Vinyl Ester Resin (>150°C HDT)
CAS 3066-71-5
HDT >150°C for high-temperature chemical service
High-Reactivity UPR (Fast Cure)
CAS 26455-61-8
Gel time 8-15 min for rapid production cycle
High-Temperature Aerospace Epoxy System (Tg >200°C, DDS Cure)
CAS 25068-38-6
Tg 200-230°C — highest performance epoxy for aerospace structural applications