High-Temperature Prepreg Epoxy System for Military/Industrial UAV

Tg 150–180°C (dry) meets thermal demands of high-power UAV engines and desert operating environments

Impact-Toughened Epoxy for Carbon Fiber Drone Propellers

GIC 400–600 J/m² — 3–4× higher than unmodified epoxy, reduces catastrophic delamination on impact

Isophthalic NPG UPR (Premium Marine)

CAS 26455-61-8

Highest water resistance in the UPR family (NPG modification)

Isophthalic UPR (Marine Grade)

CAS 26455-61-8

Superior hydrolytic resistance versus orthophthalic grades

Low Smoke Flame Retardant Vinyl Ester

CAS 3066-71-5

Halogen-free — no HCl/HBr or dioxin on combustion

Low Styrene UPR (<35% Styrene)

CAS 26455-61-8

Styrene content below 35% wt for OEL compliance

Low Viscosity Vinyl Ester for Infusion

CAS 3066-71-5

Low viscosity (150-300 mPa·s) for complete preform infusion

Low-Shrinkage UPR

CAS 26455-61-8

Shrinkage 1-3% vs. 6-10% for standard UPR

Low-Viscosity Infusion Epoxy for Carbon Fiber Drone Frames

Ultra-low mixed viscosity (200–500 mPa·s) enables complete CF wet-out in VARI and RTM without vacuum assistance above 0.8 bar

Marine Epoxy System (Osmosis-Resistant, Infusion/Laminating)

CAS 25068-38-6

Low water absorption (<2%) — osmosis-resistant for long-term marine immersion

Marine Grade Vinyl Ester Resin

CAS 3066-71-5

Lowest water absorption in vinyl ester range (<0.15% at 1000h/40°C)

Modified Toughened Phenolic Resin (Epoxy or Rubber-Modified)

CAS 9003-35-4

40-80% improvement in impact strength over unmodified phenolic

Mono-Epoxy Reactive Diluent (2-Ethylhexyl Glycidyl Ether)

CAS 2461-15-6

Ultra-low viscosity (5-10 mPa·s) for maximum viscosity reduction

Neopentyl Glycol Diglycidyl Ether (Aliphatic Difunctional Epoxy)

CAS 17557-23-2

Difunctional — less Tg depression per unit of viscosity reduction vs. mono-functional diluents

PEEK Thermoplastic Composite Resin (Polyetheretherketone)

CAS 31694-16-3

260°C continuous service temperature — highest among processable thermoplastic composites

PPS Thermoplastic Composite Resin (Polyphenylene Sulfide)

CAS 26125-40-6

Inherent UL94 V-0 flammability — no FR additive migration or blooming

Phenolic FRP Fire-Resistant Composite System

CAS 9003-35-4

LOI >55% and Ds,max <100 for aircraft and railway FST compliance

Phenolic Novolac Resin Powder (Hexamine-Hardened)

CAS 9003-35-4

Thermoplastic at room temperature — stable 12-24 month shelf life

Phenolic Pultrusion Resin (Fire-Resistant FRP Profile)

CAS 9003-35-4

UL94 V-0, EN 45545 HL3 fire performance — unachievable with polyester

Phenolic Resole Resin (Liquid, pH 7-8)

CAS 9003-35-4

Highest FST performance in thermoset category (LOI >65%)

Phosphorus Flame Retardant UPR (Non-Halogen)

CAS 26455-61-8

Halogen-free — no HCl or dioxin on combustion

Pipe and Fitting Grade Vinyl Ester

CAS 3066-71-5

Qualified to ASTM D2996/D2997, ISO 14692 pipe standards

Pipe and Tank Grade UPR

CAS 26455-61-8

Qualified to AWWA C950, ASTM D2992, ISO 14692

Polyamide 6 (PA6) Composites Resin

CAS 25038-54-4

High strength-to-weight ratio vs metals