Structural Adhesives
Epoxy, MMA and polyurethane structural adhesives for composite bonding
Epoxy Adhesives
10 products
1-Part Heat-Cure Epoxy Film Adhesive
One-component — no mixing, no mess, precise bond line control
2-Part Epoxy Structural Adhesive (5 min cure)
5-minute work time and fixture for rapid production cycles
2-Part Epoxy Structural Adhesive (60 min work time)
60-minute open time for large and complex assemblies
BMI Film Adhesive (Aerospace Grade)
Tg >230°C for high-temperature aerospace service
MMA Adhesives
6 products
2-Part MMA Adhesive (2 min work time)
2-minute work time for ultra-fast production cycles
2-Part MMA Adhesive (Flexible Grade)
Flexible cured adhesive (Shore A 70–85) accommodates thermal movement and vibration
2-Part MMA Structural Adhesive (Standard)
Bonds most substrates with minimal surface preparation — no priming required
MMA Adhesive Gel Paste (Vertical Surfaces)
Non-sag gel paste for vertical and overhead application
Polyurethane Adhesives
4 products
1-Part Moisture-Cure PU Adhesive
Single component — no mixing required
2-Part Polyurethane Composite Adhesive
High elongation (50–150%) and T-peel (≥6 kN/m) for flexible bonding
Flexible Polyurethane Adhesive for FRP
Ultra-high elongation (>200%) for maximum flexibility
PU Marine Adhesive Sealant
Combined adhesive + waterproof sealant in single product
Foam & Core Adhesives
2 products