N-(2-Aminoethyl)-3-aminopropylmethyldimethoxysilane (KH-602)

CAS 3069-29-2

Methyl-substituted difunctional silane — does not crosslink silicone network, acts as chain extender and adhesion promoter

N-(n-Butyl)-3-aminopropyltrimethoxysilane

CAS 31024-56-3

Secondary amino (n-butyl), methoxy functionality

Nano Rubber Toughener Dispersion for Epoxy

Nano scale (50–200 nm) — effective in highly crosslinked epoxy where CSR/CTBN cannot toughen

Octyltrichlorosilane

CAS None

n-Octyl, chloro functionality

Octyltriethoxysilane (Surface Hydrophobization Agent)

CAS 2943-75-1

Non-reactive alkyl silane — provides hydrophobic surface coating, not polymer coupling

Optical-Grade Polycarbonate for Drone Camera and Gimbal Housing

Izod impact 700 J/m — absorbs crash energy without shattering, protecting camera sensor and optics

Organoclay Rheology Modifier (Bentone Type)

CAS 71011-27-3

Organophilic smectite clay — compatible with non-polar and solvent-borne resin systems

PA6-GF30 Glass-Filled Nylon for Drone Motor Mounts

Tensile strength 180 MPa and flexural modulus 9,000 MPa provide motor shaft alignment rigidity under vibration

PEEK for High-Speed Drone Motor Bearings and Bushings

Continuous use temperature 260°C — exceeds even high-power brushless motor bearing zone temperatures

PEI (Ultem) for Drone ESC and Flight Controller Mounts

UL 94 V-0 at 0.8 mm without halogen additives — self-extinguishing in the event of ESC overload or short circuit

POM Acetal for Drone Gimbal Gears and Linkages

Fatigue endurance 30 MPa at 10⁷ cycles — withstands millions of gimbal positioning cycles without gear tooth fatigue failure

Paraffin Wax Solution (Styrene Suppressant / Air Inhibition Barrier)

CAS 8002-74-2

Eliminates surface tack in open-mold UPR curing — allows tack-free, sandable surface

Phenyltriethoxysilane

CAS 780-69-8

Phenyl, ethoxy functionality

Phenyltrimethoxysilane

CAS 2996-92-1

Phenyl, methoxy functionality

Polyether-functional trimethoxysilane

CAS 27306-78-1

Polyether, methoxy functionality

Polyethylene Low Shrink Additive (LPA-PE)

CAS 9002-88-4

Void-free shrinkage compensation via PE crystallization expansion — not microvoid formation

Polymeric HALS UV Stabilizer (High MW, Low Volatility)

CAS 65447-77-0

Very low migration and volatility — remains active in composite matrix throughout service life

Polymeric Thickener for UPR Systems

Transparent viscosity building — no haze in clear UPR casting and coating systems

Polymethyl Methacrylate Low Profile Additive (LPA-PMMA)

CAS 9011-14-7

Produces minimal surface haze — ideal for unpigmented or translucent SMC/BMC applications

Polystyrene Low Profile Additive (LPA-PS)

CAS 9003-53-6

Controls UPR volumetric shrinkage — enables Class A surface in SMC/BMC molding

Polyurethane Toughener for Epoxy (Isocyanate-Terminated Prepolymer)

Forms continuous PU-epoxy IPN toughening — not discrete rubber particles

Polyvinyl Acetate Low Profile Additive (LPA-PVAc)

CAS 9003-20-7

Superior Class A surface smoothness vs. PS LPA — preferred for premium automotive SMC

Proprietary aminosilane

CAS None

Diamine functionality

Proprietary aminosilane (AMEO-based)

CAS None

Primary amino, ethoxy functionality