Fast-Release Semi-Permanent Release Agent

This fast-release semi-permanent release agent is optimized for high-speed production environments where short demolding time and minimal demolding force are critical to production throughput. The product uses a specialized low-friction fluoropolymer blend that provides the minimum possible interface adhesion between cured composite part and mold surface, enabling rapid, easy demolding in production cycles where operator cycle time is a key metric. Provides 12–20 releases per application cycle. Particularly effective for parts with slight undercuts, complex geometry, or thin cross-sections where difficult demolding can cause part damage and production delays. Compatible with polyester, vinyl ester, and epoxy resins at temperatures up to 120°C. Apply 4–5 coats on new molds, then refresh with 1 coat every 8–10 releases. The release agent does not transfer to part surfaces and parts are directly bondable. Used in high-cycle marine, automotive, and wind energy composite production lines.