Carnauba Wax Paste Mold Release
Key Features
- High-purity carnauba wax for superior gloss and hard film
- 3–5 releases per application for hand layup production
- Compatible with polyester and epoxy laminating resins
- Does not cause pigment blush or discoloration on parts
- Suitable for new mold seasoning with mold sealer
This carnauba-based paste wax mold release is a traditional, proven release agent for open mold hand layup and spray-up composite production. Formulated with high-purity Brazilian carnauba wax blended with refined hydrocarbon solvents, it provides a durable, high-gloss release film that is suitable for polyester and epoxy laminating resins. Applied by hand with a soft cloth and buffed to a clear, thin film. Provides 3–5 releases per wax application on well-prepared gelcoat and laminate molds. Compatible with all gelcoat and resin pigment systems — does not cause discoloration or blush on part surfaces. This wax release is the preferred choice for cosmetic class-A finish production, boat building, sanitaryware, and custom composite part production. Suitable for new mold seasoning in combination with a mold sealer. Not recommended for elevated-temperature cure applications above 60°C, RTM, or infusion processes. Carnauba wax provides a harder, more durable film than paraffin wax and delivers superior surface gloss to the molded part.
Specifications
| Parameter | Value |
|---|---|
| Type | Carnauba paste wax |
| Finish | High gloss |
| Shelf Life | 36 months |
| Compatible Resins | Polyester, epoxy |
| Application Method | Hand wipe/buff |
| Max. Mold Temperature | 60°C |
| Releases per Application | 3–5 |
Applications
FAQ
For a new mold, first apply 2 coats of mold sealer (allow full cure between coats), then apply carnauba wax in thin circular motions, allow 3–5 minutes to haze, and buff to a clear gloss film. Repeat the wax application 4–6 times before the first production part. Apply 1–2 additional wax coats every 3–5 releases in production. The seasoning process builds a durable wax film in the mold surface microstructure.
Direct Contact
💬WhatsApp +86 156 3910 0440Telegram +86 156 3910 0440✉️[email protected]Reply within 24 hours